trucos inpresoras


         

Resultados 1 al 4 de 4

  1. #1
    Usuario
    Fecha de Ingreso
    22 nov, 05
    Mensajes
    554
    Compartir en:
    Compartir en Facebook  Compartir en Twitter

    Predeterminado [ofrecido] trucos inpresoras

    propongo que en este post pongamos entre todos trucos para impresoras y cartuchos, seria bueno que algun mod. los ordenara por marca y separara los trucos para cartuchos, por mi parte pongo un par que encontre en la red y de paso explico uno que hice yo con una epson C43ux: el metodo es sencillo, para resetear el contador de inpresion (error: alguno de los componentes de la impresora han llegado al fin de su vida util) en la parte superior hay 2 botones, con la impresora prendida hay que tener uno (power) presionado y presionar el otro 19 veces, apagar la impresora y encenderla nuevamente asi quedara reseteada, habria que desarmar la impresora y limpiar el recipiente donde va la tinta cuando limpia los cabezales laven bien las esponjas y dejen secarlas al sol, tengan en cuenta que es un material que absorbe mucho y tardara 1 o 2 dias en secarse. este truco con mi impresora funciono perfecto pero he escuchado que en otros han tenido que presionar 20 veces el boton, prueben y anotenlo para una proxima limpieza.

    aca dejo otros trucos, estan en ingles

    Reset para Mensajes de Tinta residual lleno de las impresoras Canon (Inglés)

    Canon GENERIC "S" SERIES RESET CODE
    Waste Ink Counter Reset.
    (1) Turn off the printer.
    (2) Press and hold the RESUME button, then press and hold the POWER button.
    (3) Release the RESUME button, Next press and release the RESUME button two(2) more times in
    succession. Note: you are still holding the POWER button). The printer's carriage will "reset"
    or move momentarily. If the above was properly performed the printer will enter the
    "Service Mode".
    (4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp
    will alternate (change) color with each key press.
    1. Service/Factory test printout, including ink sensor check.
    2. EEPROM - Info printout.
    3. EEPROM - Initialization.
    4. Reset the Waste ink counter.
    5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)
    After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.

    ++++++++++
    Canon i320, i255
    Waste Ink Counter Reset.
    Step 1 : Manual for service mode
    1. Unplug power and USB.
    2. Open door and hold power button.
    3. Connect power.
    4. Close door, then release power button.
    or Step 1: Manual for service mode
    1. Turn off the printer. And disconnect the printer cable.
    2. Press and hold the POWER button, turn on the printer.
    3. The indicator (L.E.D.) should be green.
    4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
    5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
    6. Release both buttons.
    step 2 : Software for Permanant
    1. Reconnect the printer cable.
    2.Open General Tools software and select (USB PORT)
    3 .Choose (SET DESTINATION 1) And it should be reset.
    Remark "After service mode Pls use software for permanent reset"

    ++++++++++
    Canon PIXMA iP1000
    Waste Ink Counter Reset.
    Step 1: Manual for Service mode
    1. Unplug power and USB.
    2. Open door and hold power button.
    3. Connect power.
    4. Close door, then release power button.
    step 2 : Software for Permanant
    1. Reconnect the printer cable.
    2.Open General Tools software and select (USB PORT)
    3 .Choose (SET DESTINATION 1) And it should be reset.
    Remark "After service mode Pls use software for permanent reset"

    ++++++++++
    Canon PIXMA iP1500
    Waste Ink Counter Reset.
    Step 1: Manual for Service mode
    1. Unplug power and USB.
    2. Open door and hold power button.
    3. Connect power.
    4. Close door, then release power button.
    step 2 : Software for Permanant
    1. Reconnect the printer cable.
    2.Open General Tools software and select (USB PORT)
    3 .Choose (SET DESTINATION 1) And it should be reset.
    Remark "After service mode Pls use software for permanent reset"

    ++++++++++
    Canon i850, i950, S600
    Start with the printer OFF
    1. Hold down RESUME and then hold down POWER
    2. release RESUME
    3. press RESUME twice, then release POWER
    4. Let green light blink until printer is done futzing
    Select function with RESUME press POWER to execute:
    presses - light color - function
    Number of presses - light color - function
    0 presses - green - Test print (or exit service mode on i960)
    1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)
    2 presses - green - EEPROM initialize
    3 presses - orange - Reset waste ink counter

    ++++++++++
    Canon S450 Printer
    1: Power off printer
    2: Hold Resume button then press and hold POWER, the beeper will sound once.
    3: Hold POWER and release RESUME
    4: Press RESUME twice
    5. Release Power button
    6: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
    7: Press Power to set data

    ++++++++++
    Canon BJC 1000 Serie
    1: Remove Cartridge
    2: Unplug the AC Power Cord
    3: Hold down the RESUME button
    4: Release RESUME after plugging in the AC Power cord.
    5: Press the RESUME once within 5 seconds and release the RESUME .
    6: Press and HOLD RESUME for two seconds or more and release it.
    7: Press and HOLD RESUME for two seconds or more and release it.
    8: Unplug AC Power Cord to set data.

    ++++++++++
    Canon BJC-2000 BJC-2100 Serie
    1: Remove the Cartridge
    2: Unplug the AC Power Cord
    3: Close Front access panel
    3: Hold down the RESUME/RESET button and plug in the AC power cord
    4: Release RESUME/RESET after plugging in the AC Power cord.
    5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
    6: Press and HOLD RESUME/RESET for two seconds or more and release it.
    7: Press and HOLD RESUME/RESET for two seconds or more and release it.
    8: Unplug AC Power Cord to set data.

    ++++++++++
    Canon BJC-210 BJC-240 BJC-250 BJC-255 BJC-265
    Canon BJC-4100 BJC-4200 BJC-4300 BJC-4400 BJC-4550 BJC-4650
    Unplug Power Cord
    Hold POWER and RESUME buttons
    Plug in Power Cord
    Release buttons
    Open front door of printer
    Hold the CARTRIDGE and RESUME buttons
    Press POWER
    Release all buttons after the beeps
    Press CARTRIDGE once
    Press RESUME

    ++++++++++
    Canon BJC-5000
    1: Power off printer
    2: Press and hold RESUME then press POWER, The indicator will start blinking.
    3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
    5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
    6: Press Power to set data
    Service Test Print
    1: Power off printer
    2: Press and hold RESUME then press POWER, The indicator will start blinking.
    3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
    5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
    6: Press Power to Print
    Nozzle Print
    1: Power off printer
    2: Press and POWER, until the printer beeps and release.
    Demonstration Print
    1: While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.

    ++++++++++
    Canon BJC-5100
    Self Test
    Switch Printer off. Hold Power for 1 beep.
    Waste Counter Reset
    1: Power off printer
    2: Press and hold RESUME then press POWER, The indicator will start blinking.
    3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
    5: When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
    6: Press Power to set data
    Service Test Print
    1: Power off printer
    2: Press and hold RESUME then press POWER, The indicator will start blinking.
    3: While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
    5: When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
    6: Press Power to Print
    Nozzle Print
    1: Power off printer
    2: Press and POWER, until the printer beeps and release.
    Demonstration Print
    1: While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.

    ++++++++++
    Canon BJC-3000 BJC-6000 BJC-6100 BJC-6200 S400 S450 F300 F600 F620
    Canon BJC-7000 BJC-7100 BJC-8000 BJ-F800 i6500

    1: Power off printer
    2: Hold Resume button then press and hold POWER, the beeper will sound once.
    3: Hold POWER and release RESUME
    4: Press RESUME twice
    5: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
    6: Press Power to set data

    ++++++++++
    Canon BJC-600 BJC-600e BJC-610 BJC-620
    1: Unplug Power Cord
    2: Hold POWER and FF and Print Mode buttons
    3: Plug in Power Cord
    4: Release after the beeps

    ++++++++++
    Canon BJC-50 BJC-55 BJC-80 BJC-85 M40 M70
    1: Unplug Power Cord
    2: Hold POWER and RESUME buttons
    3: Plug in Power Cord
    4: Release buttons after the printers starts up
    5: Hold CARTRIDGE and RESUME
    6: Press POWER
    7: Release all buttons after the beeps
    8: Press CARTRIDGE 16 times
    9: Press RESUME
    10: Unplug the Power cord

    ++++++++++
    Canon BJ-30 BJC-35v BJC-70
    F14 Error Reset
    1: Unplug adapter
    2: Hold POWER
    3: Plug in ADAPTER
    4: Release POWER after printer starts
    5: Hold FF and MENU and press POWER
    6: Release after beeps
    7: Press <> Cartridge until 1A is displayed
    8: Press ONLINE
    9: Press POWER to shutoff printer
    10: Unplug printer then re-plug printer

    ++++++++++
    Canon BJ F900, F890, F700, F500, S900, S820, S750 and S520
    Turn off the printer.
    Press and hold the RESUME button, then press and hold the POWER button.
    Release the RESUME button, then press and release the RESUME button two more times in succession. (youre still holding the POWER button during this). The printer mechanics will move momentarily.
    You are now in Service mode.
    Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
    1. service/factory test printout, including ink sensor check
    2. EEPROM info printout
    3. EEPROM initialization
    4. Clear the waste-ink counter
    5. Printer model setting. (more selections beyond this- leave this alone)
    After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a resta

    ++++++++++
    Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above,
    1. Turn off printer
    2. Hold down Resume button and press Power button.
    3. Keep holding down Power button and let Resume button go.
    4. Press Resume button 2 times then let BOTH buttons go.
    5. Green lights will flash and then stop blinking.
    6. When green lights are solid, press the Resume button 4 times.
    7. Press the Power button and the printer should turn off, if not, press the Power button once more.
    8. Your printer should respond as normal.

    +++++++++
    Canon S900, S820, S750, S520

    1. Turn off the printer.
    2. Press and hold the RESUME button, then press and hold the POWER button.
    3. While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.
    4. The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button.
    5. Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.

    1. Service/factory test printout, including ink sensor check
    2. EEPROM info printout
    3. EEPROM initialization
    4. Clear the waste-ink counter
    5. Printer model setting. (more selections beyond this- leave this alone)
    6. After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.

    ++++++++++
    Canon S9000

    1. Turn off printer
    2. Hold down Resume button and press Power button.
    3. Keep holding down Power button and let Resume button go.
    4. Press Resume button 2 times then let BOTH buttons go.
    5. Green lights will flash and then stop blinking.
    6. When green lights are solid, press the Resume button 4 times.
    7. Press the Power button and the printer should turn off, if not, press the Power button once more.
    8. Your printer should respond as normal.

    +++++++++
    Canon MPC190
    Reset Waste Ink
    1) Enter SERVICE MODE.
    By pressing Menu, Copy, Scan, Copy, Copy
    2) Select TEST MODE.
    3) Select [8] PRINTER TEST in TEST MODE.
    4) Select 3. [EEPROM CLEAR].
    5) Select 0. [INK COUNT].
    6) Press the [Set] key.
    7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
    +++++++++++++++++++++++

    cannon i250

    1. Quitar de la impresora el cable de la corriente (no vale solo apagarla, QUITRALE), y quitar tambien el cable usb.

    2. Presionar y NO SOLTAR hasta el punto 6 el boton POWER

    3. Volver a conectar el cable de corriente y encender la impresora, veran que el indicador esta en verde.

    4. Presionar y soltar el boton RESUME, el indicador se pondra naranja.

    5. Presionar y soltar el boton RESUME (otra vez) , el indicador se pondra verde.

    6. Ahora soltar ya el boton POWER

    7. Ahora conectar la impresora al ordenador (con el cable usb)

    8. Abrir en el panel de control (del pc), impresoras, y veran que se ha creado una copia de i250, poner esta copia como impresora predeterminada, y en principio ya deberia estar arreglado
    hay que limpiar las esponjas(material absorvente) paraque el trabajo quede terminado, si no se animan, llevarlo al service
    -------------------------------------------------------------------------
    otros para hp en ingles tambien

    Reset para Mensajes de mantenimiento de las HP (Inglés)

    To clear the Maintenance Service Message from the LCD display:
    HP IIISi Printers:

    1. Press ONLINE until the light goes off
    2. Hold down
    3. MENU until PCL CONFIG MENU appearsPress the
    4. MENU key until SERVICE MSG=ON* appearsPress the
    5. + or - key to change display to SERVICE MSG=OFFPress
    ENTER/RESET MENU key to turn message off, the * should appear, then press ONLINE
    ---------------------------------------------------------------------------------
    HP 4Si Printers:

    1. Press

    1. ONLINE until the light goes off
    2. Press
    3. MENU until CONFIG MENU appearsPress the
    4. ITEM key until SERVICE MSG=ON* appearsPress the
    5. + or - key to change display to SERVICE MSG=OFFPress the
    ENTER key to turn message off, the * should appear, then press ONLINE
    --------------------------------------------------------------------------------
    HP 5Si:

    1. Press

    1. MENU key 4 times for CONFIG MENU
    2. Press
    3. ITEM to display SERVICE MESSAGE=OFFPress
    4. ENTERPress
    ONLINE
    -------------------------------------------------------------------------------------
    HP 4000/4050/4100/5000 Printers:

    1. Turn the printer off
    2. Hold down the left side of the

    1. ITEM and VALUE +/- keys, turn the printer on and wait until RESET MAINTENANCE COUNT is displayed and then release the keys
    ------------------------------------------------------------------------------------
    HP 4500/4550 Printers:

    1. Turn the printer off
    2. Hold down the

    1. CANCEL JOB and SELECT keys and turn the printer on, then wait until the display goes blank and the three LED's come on
    2. Press the right side of the
    3. MENU key, then press the SELECT keyYou will enter
    4. SERVICE MODE after the normal test completesPress the
    5. ITEM key until the FUSER MAINTENANCE COUNT appearsPress
    6. VALUE +/- to change to zeroPress
    7. SELECT to savePress
    GO; the printer should return to READY
    ------------------------------------------------------------------------------------
    HP 8000/8100/8150 Printers:

    1. Press the

    1. MENU button until the display reads CONFIGURATION MENU
    2. Press the
    3. ITEM button until the display reads SERVICE MESSAGE = ON/OFFSelect
    4. OFF*Press
    5. SELECT to saveTurn printer off
    6. Hold the
    VALUE MINUS and ITEM MINUS buttons while turning the printer back on Hold buttons down until display reads RESET MAINT/COUNTand then release both buttons
    -------------------------------------------------------------------------------------
    HP 9000 Printers:

    1. Turn the printer off
    2. Press and hold the

    1. CHECK key
    2. Power on the printer
    3. Release the
    4. CHECK key after all three lights come on The display should read SELECT LANGUAGEPress the up arrow until
    MAINTENANCE KIT is displayed, then press the CHECK key again and the maintenance kit count has been reset
    -------------------------------------------------------------------------------------
    HP Color LaserJet 4500/4550 Printers (TRANSFER KIT RESET):

    1. Press the

    1. MENU button until the RESETS MENU is displayed
    2. Press the
    3. ITEM button until TRANSFER KIT SELECT IF DONE is displayedPress the
    SELECT button
    -------------------------------------------------------------------------------------
    HP Color LaserJet 4500/4550 Printers (FUSER KIT RESET):

    1. Press the

    1. MENU button until the RESETS MENU is displayed
    2. Press the
    3. ITEM buton until FUSER KIT SELECT IF DONE is displayedPress the
    4. SELECT buttonPress the
    GO button to return to READY
    -------------------------------------------------------------------------------------
    HP Color LaserJet 4600 Printer (IMAGE TRANSFER KIT (ETB) RESET):

    1. After Maintenance is performed, the display should read

    1. NEW TRANSFER KIT =
    2. Press the down arrow to highlight
    YES, then press the CHECK button to reset Or enter CONFIGURE DEVICE in menus, choose RESETS then RESET SUPPLIES, choose NEW TRANSFER KIT and select
    -------------------------------------------------------------------------------------
    HP Color LaserJet 4600 Printer (FUSER KIT RESET):

    1. After Maintenance is performed, the display should read

    1. NEW FUSER KIT =
    2. Press the down arrow to highlight
    YES, then press the CHECK button to reset Or enter CONFIGURE DEVICE in menus, choose RESETS then RESET SUPPLIES, choose NEW FUSER KIT and select
    -------------------------------------------------------------------------------------
    HP Color LaserJet 8500/8550 Printers (TRANSFER KIT RESET):

    1. Press the

    1. MENU button until the RESETS MENU is displayed
    2. Press the
    3. ITEM button until RESET TRANSFER LIFE COUNT is displayedPress the
    SELECT button to reset, then GO to return to READY
    -------------------------------------------------------------------------------------
    HP Color LaserJet 8500/8550 Printers (FUSER KIT RESET):

    1. Press the

    1. MENU button until the RESETS MENU is displayed
    2. Press the
    3. ITEM buton until RESET FUSER LIFE COUNT is displayedPress the
    SELECT button to reset

    Press the GO button to return to READY
    -------------------------------------------------------------------------------------
    aca les dejo un pdf con instruciones de como comprobar un cartucho. nesecitan un tester y un poco de paciencia y mucho cuidado!!! algunos cartucho se pueden quenar con solo tocar los contactos con los dedos!
    ed2k://|file|Comprobacion%20Electrica%20de%20cartuchos.pd f|167185|FE03EE155CD04B6A4F940B8215135374|h=NPZS5K LZMMBN3474DFNFZQTUWNH6GXEG|/

    ademas les dejo una direccion donde pueden buscar manuales de despiece y mantenimiento para los que se animen a desarmar su impresora, recuerden que muchas partes de las impresoras vienen con unas trabitas escondidas y si les hacen mucha fuerza las pueden romper, con los manuales pueden ubicar estas trabas y desarmar la impresora para limpiar los depositos de tinta y otras cosas mas

    http://www.eserviceinfo.com/browse.php?id=22

    en la seccion "ftp" tienen los ftps de epson y hp donde encontraran los drivers y aplicaciones para las impresoras, tambien estan los manuales

    les dejo tambien algunos programas para resetear las eeprom tengan cudado yo no los he usado pero se que si tocan algo mal pueden resetear todos los parametros de la impresora

    para las C4x

    ed2k://|file|SC43xProgram_Ver20.ZIP|578618|9D5099F2B504B2 4C054DB30198643539|h=P5BX764QVRQGLUMZ2EFOBE3XX32DA JCQ|/

    para las C40/C20

    ed2k://|file|SC402010E_Win98.zip|443346|B4D1710F702FD8D48 C3837848C198634|h=3FY7DAN3KXAVRVN2B6BLCZ6CBZKZUPIV |/

    manual de mantenimiento de las C40/20

    ed2k://|file|README%20Stylus%20C40%20C20.pdf|12965|6FBE0A 6B7B5716C7FA17DB1157D3A394|h=LDUAPQP7YLDHUWLQ7E2B2 W523ZBKVHQW|/



  2. #2
    Usuario Avatar de zotosca
    Fecha de Ingreso
    18 feb, 06
    Ubicación
    Delante del monitor
    Mensajes
    5,744

    Predeterminado

    Muchas gracias por la data, Siempre es bueno conocer estas cosas

    Traten de compartir lo que bajan al menos 10 dias

  3. #3
    Usuario
    Fecha de Ingreso
    08 dic, 05
    Mensajes
    17

    Predeterminado

    yo aporto con algo, impresora epson lx300 se apaga sola con win98, segun epson cambiar la bios y se soluciona el problema, segun varios reparadores de impresoras hay que cortar los pines 14 y 36 de el conector hembra en donde se conecta el cable de señal de la impresora. Funciona ok sin cambiar nada.

  4. #4
    Usuario
    Fecha de Ingreso
    24 ago, 05
    Mensajes
    38

    Predeterminado

    Hice lo que escribiste sobre la C43 Y NO PASO NADA!!!

Temas Similares

  1. Trucos de The Simpsons Hit and Run
    Por uauop en el foro Juegos
    Respuestas: 0
    Último Mensaje: 10/02/2007, 12:17
  2. Trucos del Zoo Tycoon
    Por uauop en el foro Juegos
    Respuestas: 0
    Último Mensaje: 09/02/2007, 12:19
  3. trucos de windows
    Por eloo-to en el foro Software
    Respuestas: 7
    Último Mensaje: 18/05/2006, 18:26
  4. Trucos Need for Speed Underground 1 PS2
    Por Sebasg1973 en el foro Juegos
    Respuestas: 0
    Último Mensaje: 21/08/2005, 22:46
  5. Trucos Gran Turismo 2 PSX
    Por Sebasg1973 en el foro Juegos
    Respuestas: 0
    Último Mensaje: 21/08/2005, 22:39

Publicidad  Contacto  Denuncias  Prensa  Labs  Reglas  RSS

Términos y condiciones  Políticas de privacidad

Búsqueda Avanzada
PRINCIPAL  FORO  LISTADOS DE ELINKS  CUENTA  AYUDA